To remove the platform, Pull the platform forward until you feel it contact the stops.
2.
Place your hands on either side of the platform to lift and remove it from the printer
Remove Part From Build Platform
To remove your part from the build platform:
Place the platform in a freezer for ten to fifteen minutes. As the parts and platform cool,
they contract at different rates and separate.
Alternatively, the parts can be mechanically separated from the build platform by force
using a tool with a stiff thin blade such as a putty knife. Make certain you do not mark the
platform. For more information on how to clean parts, refer to the VisiJet Material
Handling Guide.
Empty Waste Drawers
Personal protection equipment is required before opening waste drawer.
Follow all material handling and disposal guidelines. Always follow Global
Health and Safety guidelines and local regulations regarding handling and
disposal of regulated materials. Keep disposal records if local law requires.
CAUTION: Wear protective gloves before removing any waste material. Be
careful not to spill, drop, or expose others to these materials. Dispose the
material according to your local regulatory guidelines.
NOTE: When removing the draped portion of the bag, be careful not to spill the material that may be
on the top portion of the bag.
Summary of Contents for 5500X
