Projekt Elektronik
MESS - UND REGELUNGSTECHNIK GMBH
page 26
8. Controlsoftware for FM 3002
8.1
FM3002Control v 1.0
Fig. 11: window FM3002Control
8.2
General Description
The software FM3002Control is used to demonstrate the control of a FM 3002 via serial interface. It
allows to test the different functions of the instrument.
The software runs on all platforms wherefore the Microsoft .NET Framework 3.5 is available. Actual
(September 2008) that are Windows XP, Windows Vista, Windows Server 2003 and Windows Server
2008.
Detailed information can be found at
http://msdn.microsoft.com/en-us/library/bb882520.aspx
The supplied source code illustrates the control of the instrument by software and can used as a base
for developing an own software.
All in all the software is designed as a demo. The use in productive environment is done at one's own
risk.
8.3
Installation
The software FM3002Control is supplied with a ClickOnce-Installation. Therefore run setup.exe in the
Setup directory on the CD. The installation runs autonomous and finally starts FM3002Control.
To run the software the Microsoft .NET Framework 3.5 is necessary. If it is not installed at the
computer, the installation-routine will do that too.
During the installation an entry at the Start-menu is created, so one can start the software later via Start
→
Program
→
Projekt Elektronik GmbH
→
FM3002Control.