6
INSTALLATION & CONNECTION
STEP 1 Locate the panel in the best position
Locate the panel in a position where it is exposed to the sun for the majority of the day.
For Best results use a northern orientation. The panel will function in the horizontal or hung
position, however for best performance tilt the panels so they directly face the sun.
STEP 2 Connect to the battery
Connect the 5 meter lead to the battery, Red clamp to the
positive (+) terminal and Black clamp to the negative (-)
terminal. The solar panel will now be charging the battery.
Refer to Solar Controller Instructions, ‘Operation – L.E.D
Indication’ (page 4) for further details of charging status.
STEP 3 Secure the solar panel to the ground
Secure by pushing the legs into the ground. For greater set-up stability secure the panel to
the ground by using tent pegs which can be fed through the eyelets of the solar panel and
through the holes at the lower end of the supplied legs.
MAINTENANCE
Periodically inspect the electrical and mechanical connections. Make sure they are all tight and
free from corrosion. If necessary clean the surface of the solar panels with a soft damp cloth.
Mild detergent can also be used. Any dirt or residue on the PVC may effect performance.
B. Insert metal support legs
into the canvas loops along
the top of the panels
A. For stability feed the
supplied collapsible tent pole
through the canvas loops
