CALIBRATION MODE
(For Advanced Users Only)
Note:
The DBM100 is ready for use and has been calibrated using certified equipment.
Advanced users wishing to calibrate the voltage settings to meet specific requirements can do so by following the
steps below.
Step 1
Turn on the DBM100 either turn the ignition or press the side button.
Step 2
Hold down “SCROLL DOWN” button for 5 seconds.
Step 3
Press “ENTER” once screen lights up showing “Calibration for advanced user only”.
Step 4
Scroll “UP/DOWN” to select calibration data for battery 1.
Step 5
Press “ENTER” to set calibration data for battery 1.
Step 6
Scroll “UP/DOWN” to select calibration data for battery 2.
Step 7
Press “ENTER” to set calibration data for battery 2 and return to display mode screen.
Summary of Contents for DBM100
Page 1: ......
