DISPLAY MODE
The DBM100 features 4 display options to best suit your application.
Display 1
Display 3
Battery 1 only
Battery 1 & 2 (level indicator shows battery 1)
Display 2
Display 4
Battery 2 only
Battery 2 & 1 (level indicator shows battery 2)
To change between the display options, scroll “UP” or “DOWN” repeatedly until desired display is showing.
HIGH/LOW VOLTAGE ALARM
The DBM100 will alert you if either of your batteries reach the high or low voltage level (see “Getting
Started” stages 2–3 & 5–6), allowing you to correct the problem and prevent permanent battery damage.
When a high or low voltage is reached, the screen will flash and the buzzer will sound and the voltage in question will be
highlighted.
In the event the buzzer sounds it can be cancelled by pressing the “ENTER” Key. It will trigger again if another High or Low
voltage condition occurs. The buzzer can be enabled or disabled in the menu settings.
High Voltage warning:
High voltage warning may indicate a problem with the vehicle’s alternator or circuitry.
Low Voltage warning:
Recharge the battery immediately. Failure to do so may cause permanent battery damage.
Summary of Contents for DBM100
Page 1: ......
