Project Source 3782639 Manual Download Page 11

11

CARE AND MAINTENANCE

• To protect and maintain the finish, clean only with a soft, damp cloth.
• Do not use a detergent or cleanser that may harm the finish.

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

CORRECTIVE ACTION

Leak from under handle.

Retainer nut has come loose. 

O-ring on cartridge is dirty or 

damaged.

Tighten the retainer nut. Clean 

or replace O-ring.

Water will not shut off 

completely.

Rubber valve seat is dirty or 

broken.

Remove handle and cartridge to 

check rubber valve seat. Clean 

or replace it.

WARRANTY

The manufacturer warrants this faucet to be free from defects in workmanship and material present at 

time of shipment from the factory for a limited lifetime from the date of purchase. This warranty applies 

only to the original purchaser. The manufacturer agrees to correct such defects at no charge or, at our 

option, replace the faucet with a comparable or superior model. To obtain warranty service, call our 

customer service department at 1-866-389-8827 for return authorization and shipping instructions. 

You may be required to present a copy of your sales receipt as proof of purchase. All cost of removal 

and reinstallation are the expressed responsibility of the purchaser. Any damage to the faucet by 

accident, misuse or improper installation, or by affixing accessories not produced by the manufacturer, 

are the purchaser’s responsibility. The manufacturer assumes no responsibility whatsoever for faucet 

installation during the warranty period. There is no further expressed warranty. The manufacturer 

disclaims any and all implied warranties. The manufacturer shall not be liable for incidental, 

consequential or special damages arising at or in connection with product use or performance except 

as may otherwise be accorded by law. This warranty gives you specific legal rights, and you may also 

have other rights which vary from state to state. This warranty supersedes all prior warranties.

Summary of Contents for 3782639

























Reviews: