Project EV EVA-07S-PE-RFID User Manual Download

Page: 66 / 68

FAQ’S

7KW

My Project EV charger is not working and is continually flashing red five times

Overtemperature has been detected. Please turn off your charger at the consumer unit and leave for a short

time before turning back on. If problem persists, contact Project EV.

My Project EV charger is not working and is continually flashing red six times

Reset the RCD switch on the left-hand side of the charger. Please note: The small reset button next to the

RCD switch will need to be pushed for the switch to stay in the on position. If problem persists, contact

Project EV.

My Project EV app is showing my charger as “Unavailable”

Please check your home WiFi and ensure that it is working properly. Is the distance between the charger and

home router 10m or more? A WiFi extender may be required to boost the range of WiFi in your property.

Check your signal strength by standing next to your charger and scanning for your home WiFi using a mobile

phone or tablet. Please check our YouTube channel to watch our tutorials, support site or contact the Project

EV team directly.

My Project EV app is showing my charger as “Preparing”

Press “Start” on the app.

My Project EV charger is not working and is showing an Amber light

Press “Start” on the app.

My Project EV charger is not working and is pulsing Green

Vehicle is fully charged.

I cannot get my charger connected to my home WiFi via the app

This process should be done by the installer during installation as this helps validate your warranty. However,

if for any reason the internet drops out, please check our YouTube channel to watch our tutorial, support site

or contact the Project EV team directly.

I need help setting Reserved Charging in order to take advantage of off-peak energy tariff

Please check our YouTube channel to watch our tutorials, support site or contact the Project EV team directly.

Summary of Contents for EVA-07S-PE-RFID





































































Search results

Summary of Contents for EVA-07S-PE-RFID

Reviews:

Related manuals for EVA-07S-PE-RFID

Brands by name

Popular brands

Project EV EVA-07S-PE-RFID, User Manual

Search results

Summary of Contents for EVA-07S-PE-RFID

Reviews:

Related manuals for EVA-07S-PE-RFID

Brands by name

Popular brands