SAFETY INFORMATION
Read the following safety information carefully before performing any operations. The
product described in this manual is a lighting fixture for the projection of a light beam in
indoor and outdoor environments.
Any other use is not provided by the manufacturer and therefore relieves him of any
liability for damages arising from misuse.
Any repair that requires the dismantling of the projector assembly screws should only be
carried out by the manufacturer, who denies any responsibility for unauthorized
interventions.
Warning: The surface temperature of some projector components can reach high enough
values to burn when touched directly, during and after shutdown.
Always disconnect the projector from the outlet before any maintenance operation. You
risk taking the electric shock if you disassemble the projector or some of its parts.
For reliable operation of the device, the ambient temperature must be between -25°C
(-13°F) and 45°C (113°F).
The projector must be positioned in such a way that the objects a
ff
ected by the light
beam are at least 5 meters away from the projector lens.
Never place the projector on flammable and/or combustible surfaces.
Be sure to firmly secure the projector to an architectural element that ensures its stability
and reliability. All elements used for installation (screws, bolts, brackets, etc.) must always
be adjusted to the load they need to support.
Use an M12 bolt with a self-locking nut and use a security chain in the event of a
suspended installation.
Do not place objects on the power cable and in case if it was damaged
contact the
manufacturer for replacement in order to avoid danger of electrocution.
Air intakes should never be covered or clogged with any material. Be sure to provide
adequate ventilation to the projector to protect it from overheating. The projector should
not be placed in a closed installation or in a compartment that is too small and without
enough ventilation.
Do not look at the beam of light to avoid damaging your eyes.
Never touch the projector and all its components with wet hands.
1
