-
Place the image (gobo) centrally following the guides, see Fig. 3.
Please Note:
- if you need to shape the image you should use shaper with gobo diam. Ø = 50 mm
A
- if you don’t need to shape the image you can install gobo diam. Ø = 70 mm directly
on the lens holder
B
Fig. 3
-
Turn on the projector by rotating the brightness regulator, see Fig. 4
Fig. 4
-
Direct the projector to the surface on which you want to make the projection making
sure that it is at least 1 meter away from the projector's lens.
4
A B
