background image

DECLARATION OF CONFORMITY 

 

The product to which this manual refers is in accordance with the Directives of 
the European Community. The examination is made clear by the application of 
the CE mark on the product and the declaration of compliance. 

The  device  meets  the  requirements  of  the  2002/95/CE  (RoHS)  Directive;  the 
General  Safety  Information  Regulations:  EN60598-1,  EN60598-2-17  and  the 
European Parliament's Directive 2004/108/EC on Electromagnetic Compatibility. 

DISPOSAL OF UNUSED PRODUCT 

 

The device must be disposed of in accordance with the applicable laws relating 
to lighting products. In any case, it should not be thrown between normal waste 
or dispersed in the environment, the latter action, although legally pursued, is a 
serious danger to animals and people and a source of long-term pollution. The 
product  cannot  be  treated  as  a  simple  urban  waste  and  must  be  disposed  of 
appropriately in accordance with existing waste disposal regulations.

Avigliana, 09/11/2019 

PROIETTA 

srl

Viale Dei Mareschi 4/d - 10051 - Avigliana - TO (Italy) - VAT number: IT09964950019

tel. +39 011 9761039, [email protected], www.proietta.com

20

DICHIARAZIONE DI CONFORMITA'

PROIETTA s.r.l.

Sede legale e operativa: Viale dei Mareschi 4/d, 10051 Avigliana (To), Italy

Dichiara che: 

Il dispositivo:  proiettore
Modello:  Impressive 1200-2500

È progettato e realizzato in accordo con i requisiti essenziali elencati nelle seguenti direttive:

 - Direttiva 2006/95/EC del Parlamento Europeo, relativa ad apparecchi elettrici progettati per 
utilizzo entro certi limiti di voltaggio e in particolare conformi al seguente standard: IEC 60598.

 - Direttiva 2004/108/EC del Parlamento Europeo, relativa alla compatibilità elettromagnetica.

Smaltimento dei rifiuti in accordo con la direttiva 2008/98/EC del Parlamento Europeo sui rifiuti, 

e direttiva 2002/96/EC del Parlamento Europeo sullo smaltimento di apparecchiature elettriche 
ed elettroniche (WEEE), nonché la direttiva 2002/95/EC del Parlamento Europeo sulle 

restrizioni nell'uso di certe sostanze pericolose in apparecchiature elettriche ed elettronica e 
suoi emendamenti.

Avigliana Italy  08/01/2015

PROIETTA

 srl

Viale Dei Mareschi 4/d 10051 Avigliana-To (Italy)        p.iva /VAT. IT09964950019

tel +39 011 9761039    fax +39 011 9761099      [email protected] - www.proietta.com

22

Summary of Contents for AF32

























Reviews: