To connect to the network adapter for configuration, it is necessary to have a computer with an
address in the range 1 to 254 excluding 233.
Open a browser and type the address of the board
(IP: 192.168.1.233)
(1)
When prompted for a username and password
use for read-only:
username: user
password: user
The credentials for the configuration are:
username: admin
password: admin
To configure the network address of the
protective case to your network you have to
select “Configuration”
(2)
.
Enter your network parameters
(3)
.
Server IoT
should not be modified.
Time Int
time interval between the publishing
of the informations about the status of the
case and the next one (default 1s, but it can be
modified in a time interval between 1s and
300s).
In
Maintenance
, you can do the Reboot and
Reset to Factory directly from the app.
In
Account
, you can change the user name
and password for read-only or configuration
mode.
(1)
(2)
(3)
18
