ProHD DT-N21F, Instructions Manual, Page: 15 / 24

15
Item
Exit To do
Return Main Menu
Display setting
Display setting
Display setting
Display setting
Focus Assist setting
Display setting
Display setting
Display setting
Display setting
Display setting
R/G/B/Mono setting
Display setting
Display setting
Display setting
Item
Exit
Aspect Ratio
Scan Mode
Zoom Mode
Green Mode*3
Idle Duration
Update Driver*4
Update Kernel*4
To do
Return Main Menu
Aspect Ratio setting
Scan Mode setting
Zoom Mode setting
Display setting
Loading Factory settings and User presets
Default: Recover all settings to factory setting
User 1/2/3: Load the User settings 1/2/3
Save current User settings
User 1/2/3: Save the current settings to User 1/2/3
Settings for auto-scan input signals when switch on the monitor
On: Automatically scan
Settings to display Switch on logo or not
Display settings when in Energy Save mode
Set an idle time to enter Energy Save mode
Setting value
16:9 、 4:3
Normal 、 OverScan 、 Native
、 Zoom1 、 Zoom2
Display
Waveform
Audio Bar
Vector
Zebra
Focus Assist
Time Code
Histogram
False Color
AFD
H/V Delay
R/G/B/Mono
Color Bar
Marker
UMD
、 On
、 On
、 On
、
On
、
On
、
On
、 On
、
On
、 On
、 On
、 On
、 On
、 Blue 、 Red
、 Blue Only 、 Red Only 、 Green Only 、 Mono
Setting value
System
Freeze Frame
Source Scan*1
Logo*2
、 On
Default 、 User1 、 User2 、 User3
User1 、 User2 、 User3
On 、
On 、
Standby 、 Gray Backlight 、 Black Backlight
、 30Sec 、 2Hours 、 4Hours
No 、 Yes
No 、 Yes
*1 Source Scan
When set to “Yes”, next time switch on the monitor, the monitor will automatically scan the available signal source with the sequence
of “SDI1
→ SDI2 → HDMI → YPbPr → VGA → CVBS”.
*2 Logo
When powered on, the screen will display ProHD logo.
*3 Green Mode
When no recognized signal is detected and opreation time reaches the time selected in “Idle Duration”, the monitor will turn to green
energy saving mode: “Green mode”.
Under standby, Gray Backlight, Blacklight mode, press any button on the front panel, the monitor will be back to normal status.
*4, *5 Update Driver/ Kernel
“Update Kernel” to “Yes”. During the upgrade, please do not disconnect power until upgrade is successfully completed.