ProHD DR-N17F, Instruction Manual, Page: 19 / 24

19
General
Model name DT-N 17 F
Type Multi format LCD monitor
Screen size
Type 17.3 wide format
Aspect ratio 16:9
Horizontal/vertical frequency
(computer signal)
H: 61.93 kHz – 92.9 kHz
V: 50 Hz – 75 Hz
* Some signals within this frequency range may not be displayed
Compliant video signal format
“Available signals” on page 21
Format 3G SDI: SMPTE-425M-A/B
HD SDI: BTA S-004C, SMPTE292M, SMPTE-425M-A/B, SMPTE-274M, SMPTE-RP211, SMPTE-296M
SD SDI: SMPTE-125M, ITU-R BT.656
2K: SMPTE ST 2048-1: 2011
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio output Internal speaker: 2.5W(8Ω)
Operating conditions
Operating temperature: 0°C – 40°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
Power requirements
AC 120 V / AC 220 – 240 V, 50 Hz/60 Hz; DC11
～
17V
Rated current 1.5A (AC 100V ～ 240V)
3.0A (DC11 ～ 17V)
with the stand without the stand
Width: 430.5 mm (16 15/16˝) 430.5 mm (16 15/16˝)
Height: 328.7 mm (12 15/16˝) 310.4 mm (12 1/4˝)
Depth: 135 mm (5 1/4˝) 73 mm (2 7/8˝)
External dimensions
(excluding protruding parts)
Weight
4.65 kg(10.25lbs) (with the stand)
Accessories AC power cord x 1
17.3 ˝ wide, active matrix TFT
Width: 381.89 mm ( 15 ˝)
Height: 214.81 mm ( 8 7/16˝ )
Diagonal: 439.42 mm ( 17 5/16 ˝)
LCD panel
e p y T
e
Number of pixels displayed 1920 x 1080
Number of colors displayed 262,144
Viewing angle (TYP.) 160 ° (Horizontally), 160 ° (Vertically)
Brightness (TYP.) 300 cd/m
2
Contrast ratio (TYP.) 700 :1
Input/output terminals
Video
Input/output of composite signal: 1 line, BNC connector x 2, 1 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals
CVBS
HDMI HDMI connector x 2(IN and OUT)
VGA 1 Line, mini D-SUB 15pin x1(IN)
YPbPr Y: 1 V(p-p), 75 Ω(with sync)
Pb : 0.7 V (p-p), 75 Ω
Pr: 0.7 V (p-p), 75 Ω
E. AUDIO 3G/ HD/SD SDI Digital signal input (compatible with EMBEDDED AUDIO signals): auto detection, 2 line, BNC connector x 2
E. AUDIO 3G/ HD/SD SDI Digital signal output (compatible with EMBEDDED AUDIO signals): auto detection, 2 line, BNC connector x 2
Audio
AUDIO (IN) Analog audio signal input: 1 line, RCA connector x 2, 500 mV (rms), high impedance
AUDIO (MONITOR OUT) Speaker: 2.5W+2.5W(8Ω)
3.5mm phone
External control
GPI (MAKE)
“Using the GPI control” on page 17.
UMD (RS-485)
“Using the UMD control” on page 17.
UMD (RS-232C)