ProHD BR-DE900
HEVC and H.264 Decoding Appliance
User Manual, Version 1.0
37
System Parameters:
1.
From the main menu, select
System.
2.
Set the fields in each of the following sections below, as required, and click
Apply.
To set the Network Interfaces:
Two network interfaces are available. Each one can be used for either management and/or
streaming.
For easier management of the system, Ethernet Port 1 and 2 can be configured in DHCP mode. If
DHCP mode is selected, the system will obtain the IP address automatically from the DHCP server.
Parameter
Description
Management Access
Select the Ethernet Port used for management
(Ethernet Port 1, 2 or 1&2)
IPv4 Address Type
Select either Static, DHCP, or DHCP+Zeroconf.
Zeroconf allows the unit to get an IP address
automatically without DHCP server on the network.
To retrieve the system IP address (see "
Retrieving
or Setting Network Parameters through a USB
Thumb Drive
(on page 16)" for more information).
IP Address
Enter IPv4 Address if Static mode is selected
Subnet Mask
Enter Subnet Mask if Static mode is selected
Default Gateway
Enter default Gateway if Static mode is selected
IPv6 Address Type
Select either
Static, Statefull
or
Stateless.
Static
–
enter the Static IPv6 address.
Stateless
- when there is no concern with the
exact addresses the host use.
Statefull
- when more precise control over exact
address assignments is required.
IPv6 Address auto/prefix
Displays the IP/Prefix address.
IPv6 Address manual/prefix
Enter a static IP/Prefix address.
Default Gateway
Select which Ethernet port settings to be used as
the default gateway.