9
7
B
x4
A
2.5x2.5
A
8
B
4
7
11
1
13
Connect the switch cord to the DC
port Connect the motor cord to the
M1
port
2
2
1
Secure supporting beam, install baffle and power adaptor
Install the baffle (8) to the supporting beam (4)
using screws (B), and then lock with 2.5*2.5 wrench
(A).
Insert
Connect all cables to the adaptor (7)
Tighten screws on supporting beam with
wrench 4x4 (A) and supporting plate with
wrench 5x5 (A)
Tighten
4x4
2.5x2.5
A
A
1
2
G
3
G
STEP 5
STEP 6
STEP 7
10
Use cable tie to attach all cables
onto the table top.
Tear off
Manage cables
Attach them
Install transmission rod
Install transmission rod (5) to columns (2,3). Use 2.5*2.5 wrench (A) to tighten (G).
Connect the power after the
wiring is complete.
A
Tighten
Attention
The transmission rod is un-enclosed. Use
caution in this area as objects may get
and lubrication may be exposed.
STEP 4
Install the power adapter, tabletop and remote
Attach the desk frame to the tabletop
with screws (D). If you purchased a
Progressive Desk tabletop, use the
hardware included with the tabletop
and attach to
threaded holes.
D
x
8
15
x
3
D
15
D
Self-prepare
11
4
12
4
Securely attach the remote
directly to tabletop with screws
(
15
) to ensure features work
correctly. For remote positioning,
see graphic below.
Install the adaptor holder (11) to
the supporting beam(4).
The margins on the two
sides need to be no
larger than 7.87".
Remote must be positioned on the same side as
the motor. To attach remote to desired position,
attach desk frame to tabletop as shown below.
Please note the motor position and tabletop
grommet location when installing.
