Progressive Turf Equipment PRO-MAX 36, Operators Manual And Parts Lists

Page: 33 / 68

33
BLADE SERVICING
Always observe proper lock-out procedures when
performing any maintenance work including changing or
servicing the blades. Always remove and retain the ignition
switch key, ensure parking brake is engaged, and block and
or support machine using equipment designed for the task.
Be sure deck safety locks are engaged when working on
decks in the raised position.
Use gloves when handling mower blades. Blades can be
very sharp.
Inspect blades before each use to determine that they are
mounted tightly and are in good condition. Replace any
blade that is bent, excessively nicked, worn or has any other
damage. Small nicks can be ground out when sharpening.
Use only original equipment blades when replacing worn or
damaged mower blades. They are made of special steel
alloys and subjected to rigid heat-treat and inspection
requirements. Substitute blades may not meet these
specifications and MAY BE DANGEROUS.
BLADE SELECTION
We offer four blade styles for use with this mower:
Fixed high lift
Combined with Progressive’s high tip speed, the fixed
High-Lift blade ‘stands’ grass blades up for a clean cut,
even in damp conditions or at high mowing speeds.
Fixed low lift
Developing less lift than the High-Lift blade, Progressive’s
Low-Lift fixed blade is ideal for both new growth or sandy
soils where abrasion is a concern but superior cut quality
can never sacrificed. Also requires less tractor horse-power.