Progressive Turf Equipment 13921943, Operator'S Manual And Parts List

Page: 9 / 62

9
TD92 MACHINE SPECIFICATIONS
Cutting Width 22 feet Ground Pressure 7 pounds per square inch
Cutting Height ¾” to 5” Deck Flexibility 25° up, 15° down
Recommended HP 40 Min – 70 Max Tire To Ground 630 square inches on contact
Hydraulics Requires 1 double acting
outlet, all hoses supplied to
tractor
Numbers of Tires 10 on decks, 2 on main frame
Transport Width 9 ½ ft. Mowing Capacity MPH 2 4 6 7-1/2
Acres per hour 5.4 10.7 16 20
Assumes no stops or overlap.
Height 10 ft. Paint Finish Electro-statically painted with oven
baked finish.
Length 16 ft. SMV Sign Located at back of mower for
safety
Ground Clearance
9 ¼”
Weight Total 4100 lbs.
DECK FRAME
Drive PTO shaft to right angle gear box
driving 2-“B” section belts to 3
heavy-duty spindles.
“A” Frame Hollow structural steel tubing with
supports at high stress areas to achieve
maximum strength.
Belt
Adjustment
Easily made by loosening four belts
at gear box base and adjusting the
slide plate forward or backward and
retightening. Axles
Wheels
Tires
Rated at 4000 lbs. each
6 bolt, 6” bolt circle
2 P275/60SR 15” automotive radials
Deck
Construction
3/16” steel plate formed and welded
with supporting members at high
stress areas to achieve maximum
strength. Deck is 5” deep.
Hitch 4 positions, with height settings from 10-
1/2” to 15”. Safety chain with hook
according to Dept. of Transport
regulations.
Cutting
Height
Easy to use spacer bushings allow
adjustment from ¾” to 5” in 3/8”
increments. Tongue
Weight
Transport position – 965 lbs.
Mowing position – 360 lbs.
Spindles
3-1 3/8” (35mm) spindles are each
carried in 2 regreaseable ball
bearings, which are housed, in a
precision machined hub.
Cylinders
Screw Jack
1-2 ½” x 16”+ 2-3” x 16” double acting
2000 lbs. top wind jack for easy hookup.
Blade Support 1/4” x 2-1/2” x 11-1/2” long bar
welded to spindle and machined. ½”
bolts hold blade rigid to provide
clean level cut. Main Gear
Box
4 shaft gear box with 1-3/8-6 spline shafts,
delivering power to decks.
Blades
Speeds
High lift, heat treated, alloy steel
blades 5/16” x 2 1/2” x 32” per deck.
Tractor PTO – 540 RPM
Blades – 2215 RPM
Blade Tip Speed 18, 547 FPM
PTO
Shafts
Deck Drive…telescoping agricultural PTO
Drive shafts, with proper safety shields.
1-3/8-6 spline quick-disconnect yokes on
both ends.
Castors 18 X 9.50 X 8 NHS, 4 ply pneumatic
tires mounted on 5 bolt wheels. All
hubs are replaceable and
interchangeable.
Input PTO…rated at 85 HP at 540 RPM.