Progressive Dynamics PD52 Series Installation And Operation Manual Download Page 1

110537D 

 
Installation and Operation Guide for PD52 
& PD53 Series Automatic Transfer Switch

 

 

 

 

LIMITED WARRANTY 

 

I.

 

LIMITED WARRANTY

: Progressive Dynamics, Inc. warrants its power control center to be free 

from defects in material or workmanship under normal use and service; and limits the remedies to 
repair or replacement. 

 

II.

 

DURATION

: This warranty shall extend for a period of two years from the original date of purchase, 

and is valid only within the continental limits of the United States and Canada. 

 
III.

 

WARRANTY EXCLUSIONS

: This warranty specifically does not apply to: 

A.

 

Any product which has been repaired or altered in any way by an unauthorized person or service 
station; 

B.

 

Damage caused by excessive input voltage, misuse, negligence or accident; or an external force; 

C.

 

Any product which has been connected, installed or adjusted or used other than in accordance with 
the instructions furnished, or has had the serial number altered, defaced or removed; 

D.

 

Cost of all services performed in removing and re-installing the power converter; and 

E.

 

ANY LOST PROFITS, LOST SAVINGS, LOSS OF USE OF ENJOYMENT OR OTHER 
INCIDENTAL DAMAGES ARISING OUT OF THE USE OF, OR INABILITY TO USE, THE 
PRODUCT. THIS INCLUDES DAMAGES TO PROPERTY AND, TO THE EXTENT 
PERMITTED BY LAW, DAMAGES FOR PERSONAL INJURY. THIS WARRANTY IS IN 
LIEU OF ALL OTHER WARRANTIES, INCLUDING IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

 

IV.

 

PROOF OF PURCHASE

: A warranty claim must be accompanied by proof of the date of purchase. 

 

V.

 

CLAIM PROCEDURE

: Upon discovery of any defect, Progressive Dynamics, Inc. shall be supplied 

the following information at the address listed in this manual: 

 

A.

 

Name and address of the claimant; 

B.

 

Name, model and serial number of the product; 

C.

 

Application in which product was installed. (Includes manufacturer, model and model year where 
applicable) 

D.

 

Date of purchase; and 

E.

 

Complete description of the claimed defect. 
 

Upon determination that a warranty claim exists (a defect in material or workmanship occurring under 
normal use and service,) the product shall be shipped postage prepaid to Progressive Dynamics, Inc. 
together with proof of purchase. The product will be repaired or replaced and returned postage prepaid. 

 

 
 

Progressive Dynamics Inc. 

507 Industrial Rd. 

Marshall, MI 49068 

 [email protected]

 

 www.progressivedyn.com 

 

 

 

Summary of Contents for PD52 Series

Page 1: ...AVINGS LOSS OF USE OF ENJOYMENT OR OTHER INCIDENTAL DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCT THIS INCLUDES DAMAGES TO PROPERTY AND TO THE EXTENT PERMITTED BY LAW DAMAGES FOR PERSONAL INJURY THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IV PROOF OF PURCHASE A warranty claim must be accom...

Page 2: ...RE NOT DESIGNED FOR USE WITH 240 VOLT SINGLE LEG SUPPLIES APPLICATION OF VOLTAGES IN EXCESS OF 130 VOLTS FROM HOT TO NEUTRAL MAY CAUSE PERMANENT DAMAGE TO THE UNIT The 5200 5300 Automatic Transfer Switches can be installed as shown in figures 1 and 2 provided there is room to route the shore power generator and distribution connection wires The 5200 5300 Automatic Transfer Switches including the R...

Page 3: ...he HOT1 side must be used for the control circuitry to work For models with surge protection both HOT1 and HOT2 must have power applied for proper operation HOW TO DISABLE GENERATOR TIME DELAY PD52DCSD REMOTE DISPLAY PD52 53 CONTROL BOARD To DISABLE the time out function of the control board INSTALL a 100 jumper of the connector at J1 PD52DCS CONTROL BOARD To DISABLE the time out function of the c...

Page 4: ...ING GUIDE PROBLEM POSSIBLE CAUSES ACTION No Output when Plugged into Shore Power Wiring error between shore power and the transfer switch Correct wiring Defective transfer switch Replace transfer switch Wiring error between generator and the transfer switch Correct wiring Generator malfunction Have generator serviced No Output when Generator is Running Wiring error between generator and the transf...

Reviews: