4. Press the button of the programme you
want to set.
• The related programme indicator
stays on while all the other pro-
gramme indicators go off.
• The duration of the programme flash-
es in the display.
• The indicator
comes on.
5. Close the appliance door, the pro-
gramme starts. The programme dura-
tion starts to decrease with steps of 1
minute.
Starting a programme with delay start
1. Set the programme.
2. Press the delay start button again and
again until the display shows the delay
time you want to set (from 1 to 24
hours).
• The delay time flashes in the display.
3. Close the appliance door, the count-
down starts.
• The countdown decreases with steps
of 1 hour.
• The indicator
goes off.
When the countdown is completed, the
programme starts.
• The indicator
comes on.
You can set a programme, applicable
options and the delay start also with
the appliance door closed. In this con-
dition, you only have 3 seconds after
each setting before the appliance starts
to operate automatically.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while the
countdown operates
When you cancel the delay start, also the
programme is cancelled.
1. Press and hold at the same time button
and button
until all the
programme indicators come on and the
display shows 2 horizontal status bars.
Cancelling the programme
1. Press and hold at the same time button
and button
until all the
programme indicators come on and the
display shows 2 horizontal status bars.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
• The display shows 0.
• The indicator
comes on.
• The indicator goes off.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
If you do not press the on/off button,
the AUTO OFF function automatically
deactivates the appliance a few mi-
nutes after the end of the programme.
This helps to decrease the energy con-
sumption,
Important
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
HINTS AND TIPS
The water softener
Hard water contains a high quantity of min-
erals that can cause damage to the appli-
ance and bad washing results. The water
softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. It is im-
portant to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dish-
washer salt and water.
progress
21
