Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Level
< 4
< 7
< 0.7
< 5
1
2)
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the water
softener
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode, refer to “Setting and
starting a programme”.
2. Press and hold at the same time button
and button
until the indi-
cators of buttons
,
and
start to flash.
3. Press button
.
• The indicators of buttons
and
go off.
• The indicator of button
contin-
ues to flash.
• The display shows the current setting
of the water softener, e.g.
= level
5.
4. Press button
again and again to
change the setting.
5. Deactivate the appliance to confirm the
setting.
Filling the salt container
1.
Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt container
(only for the first time).
3.
Fill the salt container with dishwasher
salt.
4.
Remove the salt around the opening of
the salt container.
5.
Turn the cap clockwise to close the
salt container.
Caution!
Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent it, after
you fill the salt container, start a pro-
gramme.
progress
19
