background image

* Scrapers and cleaners for glass ceramic
and stainless steel can be purchased in spe-
cialist shops

Remove stubborn residues with a clean-
er for glass ceramic or stainless steel.

Scratches or dark stains on the glass
ceramic that cannot be removed do not
however affect the functioning of the ap-
pliance.

What to do if ...

Problem

Possible cause

Remedy

The cooking zones are not func-
tioning.

The desired heat setting is not
set.

Set the heat setting.

 

The fuse in the house’s electrical
wiring (fuse box) has been trip-
ped.

Check the fuse. If the fuses trip
a number of times, please call an
authorised electrician.

The residual heat indicator is not
displaying anything

The cooking zone was only on
for a short time and is therefore
not hot

If the cooking zone is supposed
to be hot, call the Customer
Service Department.

If you are unable to remedy the problem
by following the above suggestions,
please contact your dealer or the Cus-
tomer Care Department.

Warning!

 Repairs to the appliance are

only to be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.

If the appliance has been wrongly oper-
ated, the visit from the customer service
technician or dealer may not take place
free of charge, even during the warranty
period.

Disposal

The symbol  

  on the product or on its

packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for

the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.

Installation Instructions

Safety instructions

Warning!

 This must be read!

The laws, ordinances, directives and stand-
ards in force in the country of use are to be
followed (safety regulations, proper recycling
in accordance with the regulations, etc.) In-
stallation may only be carried out by a quali-
fied electrician. The minimum distances to
other appliances and units are to be ob-
served. Anti-shock protection must be pro-
vided by the installation, for example drawers
may only be installed with a protective floor

directly underneath the appliance. The cut
surfaces of the worktop are to be protected
against moisture using a suitable sealant.
The sealant seals the appliance to the work
top with no gap. When building in, protect the
underside of the appliance from steam and
moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors
and under windows. Otherwise hot cook-
ware may be knocked off the rings when
doors and windows are opened.

progress 

 5

Summary of Contents for PES 6060 E













Reviews: