background image

• Do not use the cooking zones with empty

cookware or without cookware.

• To avoid damaging cookware and glass

ceramics, do not allow saucepans or frying
pans to boil dry.

Description of the Appliance

1

2

3

4

5

145 mm

210/120 mm

265/170 mm

180 mm

 

1. Single cooking zone 1200W
2. Multi-purpose zone 1500/2400W
3. Single cooking zone 1800W
4. Residual heat indicator
5. Double ring cooking zone 750/2200W

Residual heat indicator

The residual heat indicator lights up, as soon
as the corresponding cooking zone is hot.

Warning!

 Risk of burns from residual

heat. After being switched off, the

cooking zones need some time to cool
down. Look at the residual heat
indicator.

Residual heat can be used for melting
and keeping food warm.

Operating the hob

You operate the appliance with the com-
bination appliance’s ring switches. The
operation and the function of the ring
switches is described in the Operating
Instructions for the combination appli-
ance.
Switching the outer rings on and off is
also described there.

When a cooking zone is switched on, it
may hum briefly. This is a characteristic
of all ceramic glass cooking zones and
does not impair either the function or the
life of the appliance.

Tips on Cooking and Frying

Information on acrylamides

According to the latest scientific knowl-
edge, intensive browning of food, espe-
cially in products containing starch, can
constitute a health risk due to acryla-
mides. Therefore we recommend cook-
ing at the lowest possible temperatures
and not browning foods too much.

Cookware

• You can recognise good cookware from

the bottoms of the pans. The bottom
should be as thick and flat as possible.

• Cookware made of enamelled steel or with

aluminium or copper bottoms can leave
discolorations on the glass ceramic sur-
face which are difficult or impossible to re-
move.

progress 

 3

Summary of Contents for PES 6060 E













Reviews: