38
progress
Combination of “Cooking time”
and
“End of cooking time”
The “Cooking time” and “End of cooking
time” functions can be used at the same time
so that the oven automatically switches on
and off at a later time.
1.
Using the “Cooking time” function
set
the cooking time (as described in the
relevant chapter). Then, press the button
: the display will show the
programmed setting.
2.
Using the “End of cooking time” function
set the end of cooking time (as
described in the relevant chapter).
The relevant pilot lamps will light up and
the display will show the clock time. The
oven will switch on and off according to
the set programmes.
Minute minder
The minute minder signal beeps at the
end of a set time; but the oven remains
switched on ready for use.
To set the minute minder:
1.
Press the button
repeatedly to select
the “Minute minder” function. The
relevant pilot lamp
will start flashing.
2.
Then, press the “ ” button
or “
” button
(maximum time: 2 hours, 30 minutes).
3.
After you have set the minute minder,
wait 5 seconds: the “Minute minder” pilot
lamp
lights up.
4.
When the end of the set time is reached,
the display begins to flash and an
acoustic signal sounds. To cancel the
acoustic signal, press any button.
To cancel the minute minder:
1.
Press the button
repeatedly to select
the “Minute minder” function. The
relevant pilot lamp
will flash and the
display will show the remaining time.
2.
Press the “
” button
until “0:00” ap-
pears in the display. After 5 seconds the
pilot lamp will go out and the display will
revert to the clock.
