background image

Touch Control sensor fields

The appliance is operated using Touch Con-
trol sensor fields. Functions are controlled by
touching sensor fields and confirmed by dis-
plays and acoustic signals.

Touch the sensor fields from above, without
covering other sensor fields.

Sensor field

Function

On / Off

To switch the appliance on and off

Increase settings

Increasing heat setting/time

Decrease settings

Decreasing heat setting/time

Timer

Timer selection

Lock

Locking/unlocking the control panel

Double ring switch

Switches outside ring on and off

Multi-purpose zone switch

To switch the outside ring on and off

Displays

Display

Description

 

Cooking zone is switched off

Keep warm setting

Keep warm setting is set

Heat settings

Heat setting is set

Automatic warm up function

Automatic warm-up function is activated

Fault

Malfunction has occurred

Residual heat

Cooking zone is still hot

Child safety device

Lock/child safety device is engaged

Automatic switch off

Switch off is active.

Residual heat indicator

Warning!

 Risk of burns from residual

heat. After being switched off, the
cooking zones need some time to cool

down. Look at the residual heat indicator

.

Residual heat can be used for melting
and keeping food warm.

Operating the appliance

Switching the appliance on and off

 

Control panel

Display

Pilot light

Switch on

Touch 

 for 2 seconds

 / 

lights up

Switch off

Touch 

 for 1 second

 / none

goes out

After switching on, within approx. 10
seconds a heat setting or a function

must be set, otherwise the appliance au-
tomatically switches itself off.

Setting the heat setting

 

Control panel

Indicator

To increase

Touch 

 to 

To decrease

Touch 

 to 

 progress

Summary of Contents for PAS 8060 E

















Reviews: