INSTALLATION INSTRUCTION MANUAL
LED
WALLPACKS
LIGHT,
100-277VAC
MODELS:
60W LED Wallpack
Model number parameter list:
CAUTION: This product uses input 100-277VAC driver of wide range voltage, but the actual working voltage depends
on the input voltage of the photocell that installed on the product. Normally the input voltage of photocell is
120V/208V/240V/277V single range, and also have 120-277VAC wide range. Please pay attention when installation
1. Introduction
This LED Wall-Packs light uses the latest in solid state lighting technology for long life, low
maintenance, and high efficiency.
The same as traditional HID lighting, it could be mounted a standard photocell on the enclosure,
to make it completely suitable for street lighting.
An internal power-factor-corrected switch-mode supply allows it to be used from
any nominal 100V-277V, 60Hz AC supply without any variation in light output.
Suitable for use in the following locations:
• Ambient Temp: -30~+40°C
• Wet Locations
Note
: Save these instructions for future reference.
2. Install
Guidelines
Item
Model
Input Voltage
Power
Factor
Watt
Input Current
Weight
A
60W Wallpack
100-277V AC
＞
0.9
60W
0.65A
4.1Kg
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed,
inspected, and maintained by a qualified electrician only, in accordance with all applicable
electrical codes.
Customer Service: 1-800-447-1723
PAGE 1
of
3
93109038
0
8
/
15
/19
