6,
SD/MMC Recorder Setup
(The default of Recorder is AUTO.)
1. Press Button “B” for 2 seconds then release to enter SD/MMC recorder setup function
2. Press “Select” for 1 second to increase the parameter figure.
3. Press “Next” for 1 second to select different parameters.
4. Under USER mode, the Bluetooth ON/OFF setting function will be disabled. Press button
“B” for 1 second to record, recording once per press button.
5. Under AUTO mode, the recording is as follows:
Whenever setting up, the power of the device must be turned off then on again to
reactivate the signal.
T-368 User’s Guide
v1.0
8
Speed
Record
0 Km/h
No record
Under 10 Km/h
Record once per 2 seconds
Under 40 Km/h
Record once per 5 seconds
Under 70 Km/h
Record once per 8 seconds
Under 100 Km/h
Record once per 10 seconds
Over 100 Km/h
Record once per 20 seconds
Summary of Contents for T-368
Page 10: ...T 368 User s Guide v1 0 9...