3. Operation
3.1 Getting Start
Step 1: Battery Installation
(a) Slide the power switch to “OFF” position.
(b) Press the “PUSH” button then slide the bottom cover off.
(c) Insert the Li-ion battery into the compartment. Note the orientation of the battery.
(d) Slide the bottom cover back to locked condition.
Step 2: Charge
Please charge the battery to full capacity when first time to use. Connect the attached adaptor cord to the
mini USB jack, as shown in the following figure.
The battery indication is with dual-color LEDs.
The
green LED
will be on until charge completes.
The LED indication for the battery status is described in the following.
Battery low -----------------------------------------------------------------
Red LED
flashing
Battery in charging --------------------------------------------------------
Green LED
steady on
Battery charging suspended (protection when
charge timer over or battery overheat) -----------------
Green LED
flashing
Charge completes or battery in normal capacity ---------------------- both LEDs off
T-368 User’s Guide v1.0
10
Summary of Contents for T-368
Page 10: ...T 368 User s Guide v1 0 9...