5. Set control panel lock
For children’s safety, you can set the control panel lock.
LOCK FUNCTION
Press the LOCK button for 2 seconds. Locking is fulfilled
when a buzzer sounds.
UNLOCK FUNCTION
To unlock control panel, press the LOCK button for 2
seconds. Unlock is confirmed with a buzzer sound. Control
panel and remote control return to function.
NOTE: When power is turned OFF, the fan will continue to run for 60
seconds before completely shutting off to use any residual heat
inside and to cool down all the heating elements.
MAINTENANCE
1. Unplug the unit and let it cool completely.
2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You
may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
CAUTION: DO NOT let liquid enter the heater.
3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to
clean the heater. This may cause damage or deterioration to the surface of the heater.
4. DO NOT immerse the heater in water.
5. Wait until the unit is completely dry before use.
6. Clean the air filter after 3 months of use or when it appears dirty. Remove the Air Intake
Grille and the filter as shown in the diagram. Wash the filter with clean water. Allow the
filter to dry before re-assembling back to the unit.
SAFETY FEATURES
This unit is equipped with a tip-over safety feature. Once the heater is tipped over, an internal
switch will automatically shut the heater off. Once the heater is restore in the upright position,
the heater will reset. To continue the operation, turn on the heater using the supplied remote
control or the control panel on the heater.
OVERHEAT SAFETY FEATURE
This heater is equipped with an overheat safety feature. When the heater’s internal
components reach a certain temperature that could cause overheating and possible fires, the
heater will automatically shut off.
Unit
PUSH
PULL
Air Filter
Air Intake Grille
