OPERATING INSTRUCTIONS:
PRE-OPERATING INSTRUCTIONS:
Carefully remove your heater from the box (please save the carton for off-season storage).
Make sure the unit is in the OFF position before plugging the heater into the outlet.
There is a MAIN POWER switch at the BACK of the heater.
Put the heater on a flat and stable surface.
OPERATING INSTRUCTIONS:
Plug the cord into a 120VAV/60Hz electric outlet. Only operate heater in upright position with caster
wheels attached.
Turn the
MAIN POWER switch at the BACK of the heater
CONTROL PANEL:
1. Heat-up indicator: indicates when heat-up mode is on.
2. Heat-down indicator: indicates when heat-down mode is on.
3.Temp value display: indicates set temperature value(Default indicates environment temperature)
3. Signal-receiving window: used for receiving remote control signal.
4. Timer value display: indicates set time value
5. Energy-saving indicator
：
indicates when energy-saving mode is on.
6. Temp up button: used for raising set temperature.
7. Temp down button: used for reducing set temperature
8. Mode button: used for selecting running mode
9. Energy-saving button(ECO)
10. Timer button
11. Standby button
13. Electro lock button
REMOTE CONTROL:
The remote control functions are the same as the manual operations.
1.
Power on and select the mode.
NOTE: There is a MAIN POWER switch at the BACK of the heater.
Or
Standby button:
1. When the heater is in standby mode, turn
on the heater by pressing the standby button
on the control panel or by pressing the
standby button on the supplied remote
control.
2. When the heater is working, turn off the
heater by pressing the standby button on the
control panel or by pressing the standby
button on the supplied remote control again.
Or
Mode button:
Select a heat setting.
Press the MODE button to toggle between
three heat settings
1.The HIGH(rated at 1500W)
2.The LOW(rated at 1000W),
3.
Set Desired Temperature
mode(rated at
1500W)
ONLY the temperature display( the left LED
of the panel) flash, you can press TEMP+ or
TEMP
– buttons. Set temperature indication
varies from 59
°
F
to 86
°
F
.
If the heater is in ECO mode, press the
mode button, then exit the ECO mode and
choose the
“HIGH” mode.
or
Energy-saving button(ECO):
Press the MODE button to be in ECO mode
.
ECO mode is an Economic Energy Saving
Function. When ECO mode is chosen the
heater will consume one-third less power
(rated at 500W).
NOTE: When ECO Mode is on,
the heater will not cycle on and
off. Heater will continue
working to maintain the
desired temperature.
