MULTIPLE VERTICAL ANGLES
Figure 8
MOUNTING THE HEATER IN THE WALL’S WOOD STUDS ONLY
Refer to Figures 9A to 9E
.
1. Slide the support plate into the tripod; align both square holes and tighten with screws.
(Figure 9A)
2. Install the tripod on the wall with two screws. (Figure 9B)
3. Attach the bracket on the heater, making sure it is securely fastened. (Figure 9C)
4. Place the heater (with its bracket) on the support plate. The heater can be tilted at 3
different angles. Use two screws to secure the unit in the desired angle. (Figure 9D)
5. Adjust the horizontal angle (Figure 9E)
