Air
R
emo
te TTL
-O
/P
15
www.profoto.com
Operation in MAN mode
With the Air Remote TTL-O/P set to MAN mode, the light output for
groups A,B and C can be adjusted manually. By alternating between
TTL and MAN mode, you can test your way to the perfect light.
• Press the A, B or C Group button [4] to select the corresponding
group.
• To select all groups, press one of the Group button [4] two times.
• Use the ENERGY buttons [3] to adjust the light output for the group.
The adjustment (increase/decrease) always starts from the current
light output setting and the adjustment value is momentarily shown
in the ENERGY section on the Display [2].
• Press the Model button [10] to turn on/off the modeling light in the
selected group.
• Press the Head button [9] to turn on/off the lamp heads in the
selected group (if the heads in a group are turned off, the relation
value for that group will display ‘--’)
Example of remote Display[2] settings in MANmode operation
