PROformance Hoops Pro 448, Installation & Owner'S Instructions

Page: 8 / 28

G GR RO OU UN ND D A AN NC CH HO OR R IIN NS ST TA ALLLLA AT TIIO ON N ((cco onnttiinnuueed d))
P Prro o S Se erriie es s IIn ntt.. J Ja ac ck k S Sy ys stte em m IIn ns sttrru uc cttiio on ns s
S Stteep p 11
– Locate and unpack ground anchor.
D Do o nno ott rreem mo ovvee p pllaassttiicc p plluug gss o orr hhiinng gee b bo olltt..
S Stteep p 22
– Place 2-3 bags of concrete mix into
hole; add water and stir. Follow concrete mix
manufacturer’s instructions for best results.
S Stteep p 33
– Position anchor in center of hole
with hinge side toward and parallel with
playing surface.
IIM MP PO OR RT TA AN NT T
– As hole is filled with concrete
mix, periodically place a level on top of
anchor plate and check that it is level front-to-back and left-to-right.
Also check that the top of anchor is at correct height.
S Stteep p 44
– Adjust anchor plate height, depending upon installation, per
guidelines given in Ground Anchor Placement.
S Stteep p 55
– Continue filling hole with concrete mix until it is within 1"-1.5"
(25-38 mm) of anchor plate bottom, or level with landscape –
whichever comes first.
IIM MP PO OR RT TA AN NT T
– Top of concrete fill should be sloped away from anchor
in all directions to shed moisture away.
6" (152 mm)
minimum AND
parallel
Check level both
directions
P
la
yi
ng
S
ur
fa
ce
88 w ww ww w..p prro offo orrm maanncceehho oo op pss..cco om m 11..888888..335533..44666677
G GO OA ALL A AS SS SE EM MB BLLY Y
IIM MP PO OR RT TA AN NT T::
Concrete must cure a minimum of
4488 hho ouurrss
before installing
goal.
IIM MP PO OR RT TA AN NT T::
Safe assembly of the goal requires two to three people in
good physical condition and capable of lifting 80-100 lbs (36-45 kg) each.
IIM MP PO OR RT TA AN NT T::
Locate and familiarize yourself with all parts of the goal
before beginning assembly.
Level
Rubber Mallet
12' Tape Measure
Phillips Screwdriver
Ratchet 9/16" and 3/4" Sockets
15/16" Socket (4" & 5" poles only)
15/16" Wrench (4" & 5" poles only)
9/16" and 3/4" Wrenches
R Reeq quuiirreed d T To oo ollss aannd d M Maatteerriiaallss