9
5. Hold the Right Upright (76) against the Base
(74). Be careful not to pinch the Upright
Wire (63).
Insert a 3/8" x 3 1/4" Screw (2) with a 3/8" Star
Washer (3) into the upper hole in the Right
Upright (76). Partially tighten the Screw into the
Base (74).
Partially tighten two more 3/8" x 3 1/4" Screws
(2) with two 3/8" Star Washers (3) into the Right
Upright (76) and the Base (74); do not fully
tighten the Screws yet.
Attach the Left Upright (not shown) in the
same way. Note: There are no wires on the left
side.
3
76
3
2
74
63
5
6. Identify the Left and Right Handrails (59, 64).
(Note: The Right Handrail has a large hole
in one side.) Orient the Console Frame (7) so
that the nut inserts (C) are on the bottom. Then,
insert the Console Frame into the Left and Right
Handrails.
Tighten two 1/4" x 1 1/4" Screws (77) with
two 1/4" External Star Washers (61) into each
Handrail (59, 64) and into the Console Frame
(7); do not fully tighten the Screws yet.
7
77
6
61
61
C
Hole
59
64
77
C
