background image

3

WARNING:

To reduce the risk of drowning, electric shock, or serious injury, read the fol-

lowing important precautions before using the hydrotherapy spa.

READ AND FOLLOW ALL INSTRUCTIONS

1. It is the responsibility of the owner to ensure

that all users of the hydrotherapy spa are
adequately informed of all precautions.

2. Use the hydrotherapy spa only as described

in this manual.

3. The hydrotherapy spa is intended for home

use only. Do not use the spa in a commercial,
rental, or institutional setting.

4. Use the hydrotherapy spa only on a level sur-

face. Do not use the spa on carpet or other
materials that could be damaged by moisture. 

5. The hydrotherapy spa will weigh approxi-

mately 3,300 pounds when it is filled with
water. Make sure that the location you select
for the spa will support this weight, plus the
weight of the occupants.

6. Inspect and tighten all parts regularly.

Replace any worn parts immediately.

7. DANGER—Risk of injury: Do not remove or

alter the covers on the suction fittings. Never
operate the hydrotherapy spa if the suction
guard is missing or broken. If you need to
replace a suction fitting or pump, make sure
you use only manufacturer recommended
replacement parts. Keep hair and body parts
away from the suction guard. Do not allow
long hair to float freely in the water; long hair
should be restrained with a bathing cap.

8. IMPORTANT: Do not allow the hydrotherapy

spa to be exposed to direct sunlight when it
is empty. The surface of the spa shell can
reach temperatures as high as 150°F in a mat-
ter of minutes if exposed to the sun while it is
empty. These high temperatures can cause
significant damage, such as blistering of the
shell surface and warping of the spa shell.
Any damage caused by sun exposure is not
covered under the warranty.

9. Do not bring any object into the hydrotherapy

spa that could damage the spa shell.

10. Never insert any object into any opening.

11. Do not use breakable containers in or near

the hydrotherapy spa.

12. Do not sit on the spa cover or place objects

on it; it is not designed to support weight. 

13. Remove any water or debris that may collect

on the spa cover. 

14. Keep children under the age of 12 and pets

away from the hydrotherapy spa when it is
not in use. 

15. Keep all chemicals away from children and

pets.

16. The pH and chemical balance of the water

must be maintained as explained in this man-
ual (see pages 12 and 17). Failure to do so
may cause injury to users or damage to the
hydrotherapy spa, and will void the warranty.

17. Individuals with infections and open sores or

wounds should not use the hydrotherapy
spa. Bacteria thrive in warm and hot water.
Always keep your spa disinfected and main-
tain the proper chemical balance.

18. Shower before and after using the hydrother-

apy spa. This will remove any deodorant, per-
spiration, or body oils that could contaminate
the water. Showering after will remove any
residual chemicals and any bacteria that may
have been in the spa.

19. WARNING—The Ground Fault Circuit

Interrupter (GFCI), must be tested before
each use. To test the GFCI, press the “test”
button while the hydrotherapy spa is running.
The spa should shut off. Press the “reset”
button. The spa should resume normal opera-
tion. If the spa continues to run after the
“test” button is pressed, then the GFCI is
damaged. Do not use the spa until the GFCI
has been repaired or replaced by a qualified
electrician.

Important Safety Instructions

Summary of Contents for PFSB43140

























Reviews: