9
6
6. Orient the Handlebar (7) as shown.
While a second person holds the Handlebar (7)
near the Handlebar Post (6), connect the Upper
Wire (68) to the Lower Wire (69).
Insert the wires into the Handlebar Post (6).
Tip: Avoid pinching the wires.
Attach the
Handlebar (7) to the Handlebar Post (6) with a
5/16" x 3/4" Screw (92) and a 5/16" x 2 1/4"
Screw (81).
Avoid pinching
the wires
69
68
7
81
92
6
7
8
94
101
102
7
7. Orient the Handlebar Cover (8) as shown.
While a second person holds the Handlebar
Cover (8) near the Handlebar (7), connect the
Receiver Wire (101) to the Extension Wire
(102). Insert the wires into the Handlebar.
Tip: Avoid pinching the wires.
Attach the
Handlebar Cover (8) to the Handlebar (7) with
two #8 x 3/4" Screws (94).
Tip: First, insert the front #8 x 3/4" Screw
(94) through the Handlebar (7). Next, set the
Handlebar Cover (8) on the Handlebar and
tighten the front Screw. Then, tighten the
rear #8 x 3/4" Screw (94) into the Handlebar
and the Handlebar Cover.
63
61
8. Identify the Left Pedal (61), which is marked
with an “L.”
Using an adjustable wrench,
firmly tighten
the
Left Pedal (61)
counterclockwise
into the Left
Crank Arm (63).
Tighten the Right Pedal (not shown)
clockwise
into the Right Crank Arm (not shown).
8
94
Front
Rear
Avoid pinching
the wires