10
8
47
68
6
2
8. Tip: Avoid pinching the Main Wire (68) during
this step.
Locate the Post Knob (47) near the front of the
Frame (2). Loosen the Post Knob, and then pull
it outward.
Next, insert the Handlebar Post (6) into the
Frame (2), and release the Post Knob (47) into
one of the adjustment holes in the Handlebar
Post. Make sure that the Post Knob is in an
adjustment hole. Then, tighten the Post Knob.
Avoid pinching the
Main Wire (68)
9
105
7
9. Have a second person hold the Handlebar (7)
near the Handlebar Carriage (105).
Locate the remaining wire tie (E) in the
Handlebar Carriage (105). Tie the indicated
end of the wire tie to the two wires (F) on the
Handlebar (7).
Next, pull the other end of the wire tie (E)
until the two wires (F) are routed through the
Handlebar Carriage (105). Then, untie and
discard the wire tie.
E
F
