background image

10

HOW TO USE A PACE PROGRAM

Turn on the console.

See step 1 on page 9.

Select one of the four pace programs.

Each time the
console is
turned on, the
manual mode
will be selected.
To select a
pace program,
press the
Program button
repeatedly until the number 1, 2, 3, or 4 appears
in the upper right corner of the display.

The four profiles on the right side of the console
show how the target pace will change during the
programs. For example, profile number 1 shows
that during program 1, the target pace will
increase near the beginning of the program, and
then decrease near the end.

Start the program.

To start the program, begin pedaling. Each pro-
gram consists of either 20 or 30 one-minute peri-
ods. One target pace is programmed for each
period. (The same target pace setting may be
programmed for consecutive periods.)

The target pace
settings for the
program will be
shown by the
target pace
indicator in the
display. (The
pace indicator
will show your
actual pedaling
pace.) As the

target pace indicator changes in height during the
program, adjust your pedaling pace so that both
indicators are the same height. If your pedaling
pace is slower than the current target pace set-
ting, an arrow will appear next to the pace indica-
tors to prompt you to increase your pace; if your
pace is faster than the target pace, an arrow will
prompt you to decrease your pace.

Important: The target pace settings for the
program are intended only to provide a goal.
Your actual pace may be slower than the tar-
get pace settings, especially during the first
few months of your exercise program. Make
sure to exercise at a pace that is comfortable
for you. 

During the program, adjust the resistance of the
pedals as desired by turning the resistance knob.

The display will show the time remaining in the
program. If you continue exercising after the pro-
gram is completed, the display will continue to
show your exercise feedback.

Follow your progress with the display.

See step 4 on page 9.

Measure your heart rate if desired.

See step 5 on page 9.

When you are finished exercising, the console
will automatically turn off after a few minutes.

See step 6 on page 9.

6

5

4

3

2

1

Target Pace Indicator

Pace Indicator

Summary of Contents for Cardio Crosstrainer 650

















Reviews: