6
100
99
82
5. Remove the backing from the Wrench Clip (99). Press
the Wrench Clip onto the base of the right Upright (82)
as shown. Press the Allen Wrench (100) into the
Wrench Clip.
6.
Make sure that all parts are tightened before you use the treadmill.
To protect the floor or carpet, place a
mat under the treadmill.
5
4. With the help of a second person, carefully tip the
Uprights (82) down as shown.
Make sure the Extension
Legs (103) remain inserted into the Uprights.
Attach
one of the Extension Legs with two of the four Short
Screws (101) as shown. Attach the other Extension Leg
in the same way.
Tighten a Handrail Bolt (78) with a Handrail Washer (96)
into the right Upright (82) and the lower end of the right
Handrail (75) as shown. Note: It may be necessary to
move the Handrail up or down to align the holes in the
Upright and the Handrail.
Next, tighten a Handrail Bolt (78) with a Handrail Washer
(96) into the left Upright (82) and the lower end of the left
Handrail (not shown).
With the help of a second person, carefully tip the
Uprights (82) back to the upright position.
4
101
96
78
101
82
96
78
103
101
101
103
82
75
