5
Latch Screw (35)Ð2
Extension Leg Screw (53)Ð4
ASSEMBLY
Assembly requires two people.
Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.
Assembly requires the included allen wrench
and your own phillips screwdriver .
1. With the help of a second person, carefully raise the
treadmill to the upright position. As a second person tips
the treadmill to one side slightly and holds it, insert one
of the Extension Legs (34) into the treadmill as shown.
Make sure that the Base Pad (40) is on the indicated
side of the Extension Leg. Attach the Extension Leg
with an Extension Leg Screw (53).
Be sure to push on
the head of the Extension Leg Screw while tighten-
ing it.
Attach the other Extension Leg (not shown) as described
above.
With the help of a second person, carefully lower the
treadmill so that both Extension Legs (34) are resting
flat on the floor.
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor.
To decrease the possibility of
injury, bend your legs and keep your back straight.
53
34
40
1
2
