background image

3

BEFORE YOU BEGIN

Congratulations for selecting the revolutionary PRO-
FORM

¨

REBEL Recumbent Bike and Elliptical

Crosstrainer. The REBEL is an incredibly smooth
exerciser that moves your feet in a natural elliptical
path, minimizing the impact on your knees and ankles.
And the unique REBEL can easily be converted from
an elliptical crosstrainer to a recumbent bike, giving you
two machines in one. Welcome to a whole new world
of natural, elliptical-motion exercise from PROFORM. 

For your benefit, read this manual carefully before
you use the REBEL.

If you have additional questions,

please call our toll-free HELPLINE at 

1-800-736-6879

,

Monday through Saturday, 7 a.m. until 7 p.m. Central
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number is

831.285872

. The serial number can be found on a

decal attached to the REBEL (see the front cover of
this manual).

Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.

Resistance Knob

Upright

FRONT

BACK 

RIGHT SIDE

Pedal

Handlebar

Lock Knob

(on back)

Side Shield

Pedal Leg

Base

Console

Book Holder

and Seat

Backrest

Toe Pedal 

Summary of Contents for 831.285872

















Reviews: