background image

5

Thank you for selecting the revolutionary PROFORM

®

6.0 GSX treadmill. The 6.0 GSX treadmill offers an im-
pressive array of features designed to make your
workouts at home more enjoyable and effective. And
when you’re not exercising, the unique 6.0 GSX tread-
mill can be folded up, requiring less than half the floor
space of other treadmills.

For your benefit, read this manual carefully before
you use the treadmill.

If you have questions after

reading this manual, please see the front cover of this
manual. To help us assist you, note the product model

number and serial number before calling. The model
number of the treadmill is PFTL51105.1. The serial
number can be found on a decal attached to the tread-
mill (see the front cover of this manual for the location). 

To avoid a registration fee for any service needed
under warranty, you must register the treadmill at
www.proformservice.com/registration.

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Upright

Storage Latch

Key/Clip

Reset/Off 

Circuit Breaker

Walking Belt

Cushioned Walking Platform

for maximum exercise comfort

Foot Rail

Power Cord

RIGHT SIDE

Rear Roller  
Adjustment Bolts

Console

Water Bottle Holder

(bottle not included)

Fan

BACK

Summary of Contents for 6.0



























Reviews: