7
3
3. Orient the Rear Stabilizer (31) and the Carriage
Rail (9) as shown.
Attach the Rear Stabilizer (31) to the Carriage
Rail (9) with three M8 x 36mm Screws (26);
do
not tighten the Screws yet.
26
9
31
4
4.
Tip: It may be helpful to loosen the four M6
x 40mm Screws (42) in the Seat Frame (7)
before you begin this step. Retighten the
Screws after you complete this step.
Partially tighten the Adjustment Knob (14) into
the Seat Carriage (3).
Orient the Seat Carriage (3), the Backrest Frame
(5), and the Seat Frame (7) as shown.
Set the Backrest Frame (5) on the Seat Frame
(7), and then slide the Seat Carriage (3) onto the
Backrest Frame.
Attach the Seat Carriage (3) and the Backrest
Frame (5) to the Seat Frame (7) with two M8 x
40mm Screws (58), an M8 x 120mm Bolt (41),
and an M8 Jam Nut (29).
7
5
58
29
58
41
42
14
3
5
14
3
5. Orient the Seat Carriage (3) as shown. Loosen
the Adjustment Knob (14), if necessary, and slide
the Seat Carriage onto the Carriage Rail (9).
9
