TIPS & REMARKS
Batteries:
In case the battery-LO indication lights, the batteries have to be replaced.
When the batteries need to be replaced, act as follow:
1.
disconnect the telephone from the telephone outlet
2.
press key MENU 5 times, the display shows “REPLACE BATT”
3.
press YES, the display shows “SYSTEM HALT”
4.
replace the batteries within ONE minute
5.
press MENU until the display gives the time/date
6.
reconnect the telephone with the telephone outlet
Do not just throw away empty batteries but hand them over to your local
depot for chemical waste.
Always disconnect the telephone from the telephoneline when replacing the bat-
teries.
PABX:
In case the TX-168PHB will be connected to a PABX, check if the PABX is suita-
ble for Caller-ID. If not, the TX-168PHB has to be connected directly to the public
telephone network.
ISDN:
The TX-168PHB only display's the number of the caller when the used ISDN
exchange is suitable for CLIP for analogue telephones
Call waiting:
If during a telephone-call a new call comes in, the number of this second call will
not be displayed.
VoiceMail / PhoneMail:
System FSK:
In case your provider supports VM facilities and you receive a mail, than the VM
symbol (envelope) on the display will light. After you have listened to the mail, the
provider will take care that this indication goes off.
System DTMF:
The DTMF system is not that intelligent that it can light the VM symbol.
You can however look in the Caller-ID memory. In case no one called you, then
there will also be no voicemail.
Be advised that if someone called you and might be routed to your voicemail, he
or she might not have left a message.
11
Summary of Contents for TX-168PHB
Page 1: ...USERS MANUAL TX 168PHB...
