4
Model Pro S 500T “TURBO”
•
Fill the reservoir to full level with baby oil provided. See back of unit
for fill level.
Do not over fill
.
•
Attach power cables and Air/Smoke Hose to the
Smoke Monster
•
Attach shop air to the
Smoke Monster
•
Attach power cables to a fully charged vehicle battery.
Do not attach
to a battery charger
.
•
Power up the unit using the
RED
power switch on the side.
•
Start the unit operation by pushing the
GREEN
“on” button on the
front.
•
Push the
AIR
button on front and open the airflow dial.
•
Place your thumb over the airflow brass nozzle at the end of the
hose. The pressure gauge should move close to the black mark. (15”
of water column pressure).
•
Turn the unit
OFF
using the
RED
button on the front
•
Turn the unit
ON
again using the
GREEN
“on” button on the front.
•
Press the
SMOKE
button on the front. Smoke should begin coming
out the nozzle in about 20 seconds.
•
You can control the amount of smoke by opening or closing the
airflow dial on front.
•
Unit is now ready to use for diagnostic purposes.
•
Press the
RED
button on the front to enable
Turbo Mode
and Press
again anytime to disable it.
