PROFILO DF1015W3VV, Instructions For Use And Installation

Page: 3 / 32

en
3
enTable of contents enInstructions for use
Safety and warning
information
Before you put the appliance
into operation
Carefully read through the instructions
for use and assembly instructions. They
contain important information on setting
up, using and maintaining the appliance.
The manufacturer is not liable for any
damage caused by failure to follow the
guidance and warnings contained in the
instructions for use. Retain all documents
for later use or for subsequent owners.
Technical safety
The appliance contains a small quantity
of the environmentally-friendly, though
flammable, refrigerant R600a. Make sure
that the pipes of the refrigerant circuit are
not damaged during transport or
installation. If refrigerant squirts out, it
may cause eye injuries or ignite
In the event of damage:
■
Keep naked flames or sources of
ignition away from the appliance,
■
Ventilate the room well for a few
minutes,
■
Switch off the appliance and unplug it
from the mains,
■
Inform After-sales Service.
The more refrigerant an appliance
contains, the larger the room must be in
which it stands. If there is a leak and the
room is too small, a flammable gas-air
mixture may form.
The room must be at least 1 m³ in size
for each 8 g of refrigerant. The quantity
of refrigerant in your appliance is stated
on the rating plate inside the appliance.
If the mains power lead of this appliance
is damaged, it must be replaced by the
manufacturer, After-sales Service or an
equally qualified person. Incorrect
installation or repairs may result in
significant risks to the user.
Repairs may only be carried out by the
manufacturer, After-sales Service or an
equally qualified person.
Only genuine replacement parts from the
manufacturer may be used. Only such
parts are guaranteed by the
manufacturer to meet the safety
requirements.
Any mains power lead extension may
only be obtained from After-sales
Service.
During use
■
Never use electrical appliances inside
the appliance (e.g. heaters, electric
ice-makers). Risk of explosion!
■
Never defrost or clean the appliance
with a steam-cleaning device. The
steam may come into contact with
electrical components and cause a
short circuit. Risk of electric shock!
■
Do not use pointed or sharp objects to
remove layers of ice and frost! You
could damage the refrigerant pipes. If
refrigerant shoots out, it may ignite or
cause eye injuries.
■
Do not store products with flammable
propellant gases (e.g. spray cans) or
explosive substances inside the
appliance. Risk of explosion!
■
Do not use the base, rails, doors, etc.
as a step or support.
■
For defrosting and cleaning, unplug
the appliance from the mains or switch
off the circuit-breaker. When
unplugging the mains plug, always
take hold of the plug itself, never pull
on the connecting lead.