Operating instructions
1. Select user on smart body scale.
3. Step on smart body scale - must be barefoot
to ensure accurate measurements.
5. Smart body scale will display each measurement. Step off smart body scale after beep.
6. Smart body scale will begin cycling through data and
store/transmit data.
7. Scale will powerdown when LCD goes black.
Select different user only after LCD screen goes black.
8. Log into www.profileplan.net to check the results or use the mobile app.
Reminders
1. Do not use smart body scale on carpet without carpet feet installed.
2. Stand on the platform with bare feet for correct measuring.
3. If the smart body scale is not to being used for an extended time, remove the batteries.
4. Clean the smart body scale with a slightly damp cloth.
5. Do not immerse the smart body scale in water or use chemical/abrasive cleaning agents.
2. Smart body scale will begin cycling through Height and Age.
(if incorrect go to www.profileplan.net and adjust)
How the Smart Body Scale Works
The Smart Body Scale uses BIA (Bio Impedance Analysis) technology which passes an electrical current through the body to
estimate body fat mass, lean mass, total body water and bone mass. The electrical current is small and not felt. Contact with
the body is made through a special ITO glass platform of the Smart Body Scale.
NOTE: This device is a personal monitor and should be used in a consistent manner for the most accurate reading. While
readings of this analyzer might be different with that of others (hydro-densitometry or hand held calipers), your changes in body
fat percentage shown by this device will be reflected accurately. While this analyzer will work accurately as a smart body scale
for anyone and give accurate body fat readings for a majority of people, women who are pregnant and children can use this,
however the body fat reading may not be as accurate.
4. Smart body scale will begin taking weight and other
measurements.
