UK
PROGRAMMING
DELETE PROGRAMME
PROGRAMMING MULTIPLE BELLS
Access the button by pressing in the tab on the side and
removing the insulating strip.
NOTE :
When you replace or remove the batteries from the bell unit please always re-follow the above
steps to programme the bell.
To delete a programme, remove the batteries from the
button and the bell. Press the button for 10 seconds. Leave
both for 30 seconds.
Repeat steps 1A - 1C for all bells. Do this per bell in order to avoid interference.
Slide open the lid on the back. Insert 2 alkaline batteries
into the battery compartment. The bell will not make a
sound. The bell is ready to learn and memorise the digital
code.
Within a minute, push the button. The bell will play a ring-
tone. It is now programmed. Leave it for 5 minutes before
reusing it.
B
C
1
2
3
A
BEEP BEEP
♫
♫