QUARTZ LAMP
EN - 1
100000136 ATLAS
Thank you for purchasing this Profile product. Caution: It
is important that you read this manual carefully before
using the product Then keep this manual in a safe place.
Technical information
Mains voltage: 220-240V/AC (50/60Hz)
Guarantees fast warming up
2 positions: 800W-1600W
For spaces of max. 15m²
With protection against overheating
With tilt protection: heating
switches off when tipped over
Installation
Make sure that the appliance
’
s plug is not inserted in
the socket and the switch is in the OFF position.
Mount the wheels onto the supplied fitting.
Attach the fitting to the base using the screws
Connection
The heater is supplied with a plug. Never use the
appliance with a damaged cable and/or plug, after the
heater has not been working properly, or if it has been
damaged in whatever way. The replacement of a cable
and/or socket plug may only be done by a qualified
professional who is familiar with the applicable
requirements.
Operation
Make sure that the switch is in the 0 position before
inserting the plug into the plug socket. You can then
switch the appliance on.
O
: Switch off
1
: 800W
2
: 1600W
Note:
Allow the appliance to completely cool down before
moving it.
Cleaning
We advise you to carefully clean the heater once a
month to remove dirt and dust. This is to allow the
appliance to operate efficiently and safely.
Always switch off the appliance and remove the plug
from the wall socket before you start to clean!
Clean the housing with a clean, soft and lightly
moistened cloth. Never clean the heating
elements. Let everything dry thoroughly before
switching the heater on again. Do not use any
detergent (wax) or cleaning agents; these can react
under the influence of heat and cause the colour to
deteriorate.
Save the box for storage during periods you are not
using the heater. When being stored the heater
must also be protected against dirt and dust.
Guarantee
The guarantee period is 2 years and commences on
the date of purchase.
During the guarantee period Eltra NV resolves any
defects caused by material or manufacturing faults.
Eltra NV may optionally either repair or replace the
defective appliance.
Eltra NV is not obligated to repair or replace units if the
defect is a result of damage, misuse, modification or
changes made after the date of purchase.
Bring the defective device, along with the original sales
receipt, back to the store where the unit was
purchased.
Always include a note describing the problem.
Damage
Eltra NV can under no circumstances whatsoever be
held responsible for damage of whatever nature if the
appliance was not correctly installed according to the
specified installation instructions, nor for damage as a
result of unforeseen circumstances such as natural
disasters, lightning strike, etc. All such resulting costs
are consequently at the expense of the buyer and are
not covered by the guarantee conditions.
Used household appliance collection
The European Directive 2002/96/EC on waste
electrical and electronic equipment mandates that
used appliances are not allowed in the municipal
waste stream. Used appliances must be separately
collected for the optimal recovery and recycling of
materials for the recovery and recycling of materials to
reduce the impact on human health and the
environment. All these products are marked with a
specific symbol to remind of the obligations of waste
separation
