33
• Remove the sandwich from the tongues (6). Caution:
The sandwich and the sandwich tongs (6) are hot.
Storage
WARNING:
As the housing (9) and the metal parts become hot
during operation, let the appliance cool down before
storing it.
• Clean the appliance as described and allow it to dry
completely. We recommend storing the appliance in
its original packaging during longer periods of non-
use.
• Always keep the appliance out of reach of children
and in a well-ventilated, dry place.
Mains Cable Take-up Device (4)
The mains cable can be wound onto the base.
Cleaning
WARNING:
• Before each cleaning, pull the power plug (4) out of the power so-
cket and let the unit cool down.
• Do not submerge the appliance in water! Danger of electric shock
or fire.
CAUTION:
Do not use acrid or abrasive cleaning agents.
Housing (9)
Use only a moderately moist cloth to clean the outside
of the appliance.
Crumb tray (5)
The crumb tray (5) is located on the side opposite the
control buttons.
• Use the handle to pull the crumb tray (5) out, remove
any bread crumbs, and push the tray (5) back in.
Troubleshooting
Problem
Possible
cause
Solution
Appliance not
functioning.
Appliance
without power
supply.
Check the
socket with
another appli-
ance.
Connect the
power plug (4)
properly.
Check the fuse.
Appliance
defective.
Contact our
service center
or a specialist.
Problem
Possible
cause
Solution
The bread
becomes too
dark.
The toaster
setting was too
high.
Select a lower
toaster setting.
The bread is too
light.
The toaster
setting was too
low.
Select a higher
toaster setting.
The toasting
slide (3) no
longer pops up.
A slice of bread
has become
stuck in the well
(1).
Pull the plug
(4) from the
socket! Let the
appliance cool
down!
Free the slice
of bread with
an insulated
object, e.g. a
wooden stick. If
necessary, turn
the toaster over,
so that the slice
of bread drops
out.
