manualshive.com logo in svg

Proficient the source, Installation & Programming Manual

Share
Download
Proficient the source Installation & Programming Manual Download Page 40

40

OPERATINg THE SOURCE

PARTY MODE
Party Mode allows playing a selected source in all zones from a simple Press and Hold of the 

Click Button. 
1. 

Roll

 the Scroll Wheel to 

highlight

 the desired Source. (If the Keypad is in ‘Standby’ rolling 

the Scroll Wheel or pressing any button will wake up the Keypad.)

2. 

Press and Hold

 the Click Button for longer than 2 seconds. All zones will turn ON to the 

selected source, unless 

“This Zone Ignores Other Zone Initiations”

 is selected under 

Zone Setup/Whole House/Mute

 in Proficient Editor for a given zone. If selected, that 

zone will ignore the Party Mode Command and will continue in its current state (OFF or 

playing a different source). The LCD on all Party Mode Keypads will display the selected 

Source and  a red Party will appear in the header. If an iPod is selected the LCD will also 

display the iPod Main Menu. If an external source is selected, the Virtual Buttons are 
displayed.

ZONE SETTINGS (Treble and Bass)
From the Source Keypad Main Menu:
1.  

Roll

 the Scroll Wheel and highlight 

Zone Settings

.

2.  

Press

 the Click Button. The 

Zone Settings Menu

 will appear.

3.  

Roll

 the Scroll Wheel to highlight 

Treble

 or 

Bass

.

4.  

Press

 the Click Button. The 

selected parameter

 will appear at the top of the LCD.

5.  

Roll

 the Scroll Wheel to adjust 

Treble

 or 

Bass Up/Down

.

6.   When the desired change has been made, 

press

 the Click Button to ‘Save’ the setting.

7.  

Press

 the Menu Button to 

return

 to the Source Keypad Main Menu.

KEYPAD SETTINGS

In the Source Keypad Main Menu is an option called Keypad Settings. These settings are user 

definable preferences for keypad performance and appearance including: Button Intensity, 

LCD Intensity, Button Standby, LCD Standby, Beeper and Theme. These settings are adjustable 

only at the keypad and can be changed at any time. Adjustments are made using the Scroll 

Wheel and Click Buttons.

Button Intensity
This setting adjusts the Hard Key and Scroll Wheel back-light level in increments of 1%        

from 0-100%.
LCD Intensity
This setting adjusts the LCD back-light level in increments of 25% from 25-100%.
Standby Timeout
This setting adjusts the duration of the Hard Key and LCD Backlighting in varying increments 

from 1 second to always on.

Summary of Contents for the source













































Reviews:

No comments

Brands by name

Popular brands

Load more brands